How to Repair Bifold Closet Doors

 

Bifold closet doors have several common issues that plague homeowners, but fortunately, they are simple to fix. Bifold doors are the most common type of folding door used in closets. However, because these doors are constantly sliding along a track to open and close, the hardware tends to become loose, causing problems such as the doors becoming stuck, loose, or falling off the track entirely. The following things will explore the most common problems with bifold doors, bifold closet door track repair and how to fix them.

Determine the problem

Initial step is to determine the source of the problem with the doors. Do they seem to be sticking? Is it a little too loose? Are you dragging your feet across the floor? It will be easier to figure out how to fix the problem once you have identified it. Problems with the top bracket or track are the most common cause of the door sticking or stuttering. Both the top and bottom bracket and the pivot can fall off the track or become too loose. In that situation, you have to look for bifold closet doors repair services. 

Fix sticking and scraping

First, you should do is inspect the track to see if it has been bent out of shape. Next, attempt to open the florida sliding glass doors once more. Look at the track if it still sticks. One of the screws holding the track to the frame can come loose at any time. Tighten any screws that appear to be loose with your screwdriver. If these steps do not resolve the issue, we must address the top bracket. The top bracket is located at the top of the door, inside the track.

You should close the door and examine the door's edge as it aligns with the frame. The door edge and the frame should be parallel. A loose top pivot and bracket, which has allowed the door to slip sideways out of alignment, could be the cause if it is even slightly off. When you open the door, you will notice a small screw from the bracket. This is referred to as the setscrew. Slightly loosen the setscrew. You should close the door and then push or pull the top of the door into the frame until it is perfectly aligned. Check that both doors appear to be aligned, and tighten the setscrew once the alignment appears to be back on track. 

Fixed dragging and binding 

Bind on the bottom part of the door if there are scrape marks on the door frame or a sharper edge on the door. The base bracket and pivot becoming loose and slipping can create that. You may require raising the door slightly to shift the pivot in or out, or you may need to loosen the setscrew and shift the bracket seat, depending on the type of hardware you have. Also, because the mounting screws are broken, stripped, or missing, the entire bracket can come loose from the frame. To repair or replace the mounting screws, you'll need to remove the door.

The Bottom line 

Bifold doors can get stuck and not close properly at times. When this occurs, it can be a source of concern, particularly if the external bifold door cannot close. It can be a big security risk if you cannot close and lock it. So you should take a step to repair your bifold door when you noticed the issue.